Capacitor Leakage Current/IR Meter – 11200
- Electrolytic capacitor leakage current test function
- Insulation Resistance (IR) test function
- Constant current DC power source with discharge function
- Forward voltage function for Diode, LED, Zener Diode and Varistor
- Surge voltage test function for electrolytic capacitor (JIS C5101/5102/5140/5141)
- Option contact check function to improve test reliability
- Basic accuracy: 0.3%
- Aluminum-foil withstand voltage and rise-time test function (For EIAJ RC-2364A)
- Precision low constant current charge capability (0.5mA ± 0.05mA, meet EIAJ RC-2364A requirement for withstand voltage testing of lower WV aluminum-foil)
- Large charge current (500mA) capability to fasten charge speed
- 1.0V ~ 650V / 800V DC voltage source
- 0.001uA – 20.00mA leakage current test range with 4 digits resolution
- Standard RS-232 interface
- Optional GPIB & Handler interface
- Digital timer inside
- Comparator and pass/fail alarming beeper function
- Large LCD display (240 x 64 dot-matrix)
- Friendly user interface
- Easy use graphic user interface : softpanel (Option)
The Chroma 11200 Capacitor Leakage Current / IR Meter is Chroma’s newest digital leakage current meter. It provides DC 1-650 V, 0.5mA~500mA (150mA for V > 100V) or DC1~800v, 0.5mA~500mA (50mA for V > 100V) DC power source with voltage meter and nano-ampere meter. It is mainly used for electrolytic capacitor leakage current testing, and aluminum-foil withstand voltage testing (EIAJ RC-2364A). The 11200 can also be used for active voltage checking or leakage current testing of absorber, Zener diode, and Neon lamp etc. With standard RS232 interface, optional GPIB & Handler interfaces, high speed and stable measurement capabilities enable the Chroma 11200 to be used for both component evaluation on the production line and for fundamental leakage current or IR testing for bench-top applications.
1~650V, 150mA/500mA or 1~800V, 50mA/500mA Low Noise DC Voltage Source
A low noise linear power supply is built into the Chroma 11200. The DC output voltage range is from 1.0V to 650V/800V, which covers low WV capacitor leakage current testing and aluminum-foil withstand voltage testing range. The maximum charge current of 500mA/ 100V, 150mA / 650V or 50mA / 800V provides a quick charge for large capacitor testing.
Precision low constant current charge capability (0.5mA ±0.05mA)
In general, aluminum electrolytic capacitor’s anode oxide-foil uses extremely low constant current (EIAJ-RC2364A’s standard is 0.5mA, 1mA or 2mA ±10%; and depends on the type of the foil) to test foil withstand voltage (Vt) and rise time(Tr) etc. The Chroma 11200 provides a constant charge current low to 0.5mA with high stability.
0.001u~20.00mA Leakage Current Test Range With 4 Digits Resolution
A 0.001uA to 20mA test range nano-ampere meter is built in the Chroma 11200. It is perfect for leakage current or IR testing of electrolytic capacitor and high dielectric ceramic capacitors. The extremely low input resistance (the lowest is 0 ohm) design enables high speed testing for high capacitance devices LC or IR testing.
Output Voltage Monitor
The Chroma 11200 always monitors the real output voltage no matter the test or setup operation status to maintain the safety of the operator. In addition to displaying the real output voltage in the TEST page, an error message is displayed in case the output voltage abnormally exceeds 10 volts in other operation pages.
65W/50W Semi-constant Power Discharge Circuit
A 65W semi-constant power discharge circuit is built into the Chroma 11200 for high speed and to completely discharge after a test. It satisfies the quick discharge requirement for charged large capacitors.
Built-in RS232 Interface, and Optional GPIB & Handler Interface
The Chroma 11200 built-in RS-232 interface can be used in R&D or QC for remote control and tested data fetching. A GPIB and HANDLER interface (A110235) is optional for automation.
|11200||Capacitor Leakage Current / IR Meter 650V|
|11200||Capacitor Leakage Current / IR Meter 800V|
|11200||Capacitor Leakage Current / IR Meter with contact check function 650V|
|A110235||GPIB & Handler Interface|
|A110236||Rack Mounting Kit|
|A112001||Triangle Test Fixture for manual test|
|A112006||Contact Check Function for automation test|
[contact-form-7 id=”4869″ title=”Meter 11200″]
100Hz-50kHz LCR Meter – 11021/11021-L
Test frequencies: 100Hz, 120Hz, 1kHz and 10kHz (9.6kHz); 1kHz, 10kHz, 40kHz, 50kHz
50Hz-100kHz LCR Meter – 11022/11025
0Hz, 60Hz, 100Hz, 120Hz, 1kHz, 10kHz, 20kHz, 40kHz, 50kHz, 100kHz test frequencies
Guardian Hipot Tester AC/DC/IR/SCAN – 19050
AC/DC/IR 3 in 1 EST test; AC 5kV, DC 6kV output; 1kV IR test, 1MΩ~50GΩ IR measurement.
High Frequency LCR Meters up to 30MHz – 11050
1kHz ~ 10MHz Freq. Range, 15ms, 10mV ~ 5V test level, 0.1% basic accuracy